|
Take the first step in total quality management...by maintaining
consistent film output from your processor or imagesetter,
day to day, job to job. With the battery-operated TQ+ Densitometer,
you can quickly check density, density difference and dot
area on your film images and control strips. This cordless
unit measures to 6.00D and features a self-contained, automatic
light-table as well as 4-hour fast recharge.
Backed by the latest technology and Tobias service, the TQ+
performs complete transmission density measurements quickly
and accurately.
- Lightweight but accurate.
Simple push-button operation facilitates density measurements;
cordless convenience allows transmission readings at any
location.
- Dot area measurements.
Read positive or negative dot area on film. Enter fog and
solid values of your film for maximum accuracy.
- Density difference readings.
Any density measurement may be stored as a reference. Subsequent
readings will show density differences from the stored value.
- Wide density range.
The TQ+ reads a film density value up to 6.00D with rock-solid
accuracy and stability. Features easy software calibration.
- Automatic light-table.
Instant illumination when sample is placed over aperture.
Inscribed crosshairs on the mini light-table pinpoint target
area, ensuring accurate
positioning.
- Smart charger. Fast
charge in only 4 hours; switches automatically to trickle
charge when batteries are recharged.
Red/green LED shows status of charge.
- Thousands of readings per charge. Low battery warning
when recharging is required. Also runs from charger with
100% duty cycle, if needed. Shuts off automatically to extend
battery life.
- RS-232 serial port. Use with a printer for hard copy or
with a computer for analysis or data storage.
TQ+ Applications
- DTP Imagesetters
to monitor processing quality
- Color Separations
to verify screen ranges
- Camera Department
to control film processors
- Stripping Department
for dot area computation
- Photographic Masking
to check masks and separations
|
