The SD3 quickly scans colorbars on press sheets, performing automatic densitometric evaluation of ink density, dot gain, gray balance, and trap, the SD3 instantly displays scan results as easy-to-read graphic charts.

Click Here for More Information on the Commercial Version

Or Click Here for More Information on the Newspaper Version (note: both versions share capabilities)

The SXY is a two dimensional scanning densitometer, taking readings on press sheets, and comparing them with reference values read from an OK sheet or entered manually.

Click Here for More Information

The Akukut is a hand-held device that consists of a single edge blade which can be adjusted to cut a depth less than a thousandth of an inch. It cuts squarely with a minimum amount of burr and is perfect for stripping, makeup of film or paper and decal separating.

Click Here for More Information

The IQ150 is programmed to display clearly worded prompts which allows operators to not need instructional manuals. The IQ150 measures density and computes density difference, dot area, and dot gain. The densitometer simultaneously displays all the filters densities showing the major filter in large lettering.

Click Here for More Information

The IQ200 is programmed to display clearly worded prompts which allows operators to not need instructional manuals. The IQ200 calculates density and computes density difference, dot area, and dot gain, as well as contrast, trap, hue error, and grayness. The densitometer simultaneously displays all the filters densities showing the major filter in large lettering.

Click Here for More Information